Rethink Your Life! Finance, health, lifestyle, environment, philosophy |
The Work of Art and The Art of Work Kiko Denzer on Art |
|
|
Cob: second structure spacingDarel Henman henman at it.to-be.co.jpSun Mar 9 20:58:00 CST 2003
We were all right. Using Dec. 21 for an overhang, will give you the full sunlight on the sun's lowest altitude reached on solar noon, when you want it. It will also give you sunlight on other days say from Sept. to March while the sun is still below or equal to the Dec. 21st solar noon altitude, while the higher noon altitude is cut off. You'd still get incoming solar energy until the sun reaches that altitude used. For example you would get full winter on Dec 21st if you used this date, but a little less sunlight each day before or after this date around solar noon. So if you want the extra solar energy of high noon suns earlier than Dec. 21st then that solar noon altitude should be considered. Since the sun is rises low, slowly and continualy rises then reaches it's apex, then slowly curves down (actually as you know its the earth that's spinning here, but). You might want to balance to keep out all summer direct solar energy to keep a place from heating up. Anyway this is a fun little problem to solve. Decide when to keep out the hot summer rays and when you want to get the warming winter sun rays. Darel Amanda Peck wrote: > > Like duh! > > Dorothy and Darel are right. > > It's overhang that works the other way. > > .... > > Actually, Darel is right. His solution takes care of the worst case > scenario. Using his method will cover all winter months because, if I > understand the problem correctly, the issue was to space the buildings far > enough so the northernmost building wouldn't be shaded from the winter sun. > On Dec. 21 the sun would be in the lowest position. (of course this only > applies if you're in the northern hemisphere) > > _________________________________________________________________ > Add photos to your e-mail with MSN 8. Get 2 months FREE*. > http://join.msn.com/?page=features/featuredemail
|