|
Rethink Your Life! Finance, health, lifestyle, environment, philosophy |
The Work of Art and The Art of Work Kiko Denzer on Art |
|
|
|
Fw: [Cob] Cob mixing testsBill&Julie wkbjkb3 at mn.rr.comSat Jun 24 12:40:41 PDT 2006
----- Original Message ----- From: "Bill&Julie" <wkbjkb3 at mn.rr.com> To: "Clint Popetz" <clint at cpopetz.com> Sent: Saturday, June 24, 2006 2:40 PM Subject: Re: [Cob] Cob mixing tests > Does anyone have any experiance with animal cob??? > It was good enough 500 + years ago... > Some one should re-discover it.... > Cows do it,, with out training... > > Oh poop! bill ~¿~ > > ----- Original Message ----- > From: "Clint Popetz" <clint at cpopetz.com> > To: "Susan Evans" <seasider48 at yahoo.com> > Cc: <coblist at deatech.com> > Sent: Saturday, June 24, 2006 12:34 PM > Subject: Re: [Cob] Cob mixing tests > > > > I think any method _can_ produce good cob. The trick is being able to > > detect good cob when you have it. It's the number one question people > > mixing cob for the first time have asked me. "Hey, can you check if > > this is done?" And I asked that many times of Ianto when I was first > > mixing cob too :) > > > > Now when you're driving a bobcat over cob, it's harder to tell when > > you're done, 'cause you have to shut it off, go poke around, and get > > back on. So you might get tired of that, or you might not notice the > > pockets of too-sandy or too-clumpy or too-strawy until you start > > putting it on the wall, and then you might not feel like starting the > > bobcat up again. When you're mixing by feet, you can tell as it > > gradually gets to that sweet spot, but it's of course taking a lot > > longer to do. > > > > I think everyone should be able to mix in whatever way they like. If > > mixing with your feet is too hard on your body, by all means > > experiment with machines. Just check the mix a lot until you're > > satisfied, and keep track of how long it took to get to the satisfied > > point, so that you can streamline the work as the walls go up. > > > > -Clint > > > > On 6/23/06, Susan Evans <seasider48 at yahoo.com> wrote: > > > Has anyone tested the various cob mixes? There seems to be a lack of > definitions on the mailings - hand-mixed cob is deemed superior to machine > mixed. Surely this does not mean my poor hand-mixing is superior to a > machine-mixed batch that I have spent a reasonable quantity of time > preparing. Has anyone done any actual tests? One could test by using the > same ingredients - straw cut to the same length for all mixes, etc. and mix > by hand, then also by various machine methods. Then test to failure. Are > the mixes comparable in strength at that time? > > > > > > There is too much variance in individual abilities and methodologies > to assess this properly otherwise, I think. > > > > > > My hand-mixed cob is likely to be very poor as I have a bad back and > am in my late 50s. I would be unlikely to spend a lot of time stomping > around on a tarp. It would not be very cost effective for me either. > > > > > > What exactly determines the superiority/inferority of a cob mix? > > > > > > Sue Evans > > > > > > > > > --------------------------------- > > > Yahoo! Messenger with Voice. PC-to-Phone calls for ridiculously low > rates. > > > _______________________________________________ > > > Coblist mailing list > > > Coblist at deatech.com > > > http://www.deatech.com/mailman/listinfo/coblist > > > > > > > _______________________________________________ > > Coblist mailing list > > Coblist at deatech.com > > http://www.deatech.com/mailman/listinfo/coblist >
|
Solar powered hosting (from our cob office building)
provided by:
DeaTech Research Inc.
using
Debian Linux based servers.
We highly recommend, use, and provide support services for
Debian Linux.
If you should have any problems with this page or website, please send email describing the problem(s) to: webmaster@deatech.com
Last Modified: Wednesday, 09-Dec-2009 17:36:26 PST
If you wish to be permanently blocked from ever being able to send email to this domain, send your SPAM messages to: blackhole@deatech.com